STANDARD CARBON CHEMICAL COMPOSITION CHART |
||||||
Nonresulphurized Carbon Steels |
||||||
| AISI/SAE Designation | C | Mn | P max. | S max. | Pb | |
| 1005 | 0.06 max | 0.35 max | 0.040 | 0.050 | ||
| 1006 | 0.08 max | 0.25-0.40 | 0.040 | 0.050 | ||
| 1008 | 0.10 max | 0.30-0.50 | 0.040 | 0.050 | ||
| 1010 | 0.08-0.13 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1012 | 0.10-0.15 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1013 | 0.11-0.16 | 0.50-0.80 | 0.040 | 0.050 | ||
| 1015 | 0.13-0.18 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1016 | 0.13-0.18 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1017 | 0.15-0.20 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1018 | 0.15-0.20 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1019 | 0.15-0.20 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1020 | 0.18-0.23 | 0.30-0.60 | 0.040 | 0.050 | ||
| M1020 | 0.17-0.24 | 0.25-0.60 | 0.040 | 0.050 | ||
| 1021 | 0.18-0.23 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1022 | 0.18-0.23 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1023 | 0.20-0.25 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1025 | 0.22-0.28 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1026 | 0.22-0.28 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1029 | 0.25-0.31 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1030 | 0.28-0.34 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1035 | 0.32-0.38 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1037 | 0.32-0.38 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1038 | 0.35-0.42 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1039 | 0.37-0.44 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1040 | 0.37-0.44 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1042 | 0.40-0.47 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1043 | 0.40-0.47 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1044 | 0.43-0.50 | 0.30-0.60 | 0.040 | 0.050 | ||
| M1044 | 0.40-0.50 | 0.25-0.60 | 0.040 | 0.050 | ||
| 1045 | 0.43-0.50 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1046 | 0.43-0.50 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1049 | 0.46-0.53 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1050 | 0.48-0.55 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1053 | 0.48-0.55 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1055 | 0.50-0.60 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1059 | 0.55-0.65 | 0.50-0.80 | 0.040 | 0.050 | ||
| 1060 | 0.55-0.65 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1064 | 0.60-0.70 | 0.50-0.80 | 0.040 | 0.050 | ||
| 1065 | 0.60-0.70 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1069 | 0.65-0.75 | 0.40-0.70 | 0.040 | 0.050 | ||
| 1070 | 0.65-0.75 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1074 | 0.70-0.80 | 0.50-0.80 | 0.040 | 0.050 | ||
| 1075 | 0.70-0.80 | 0.40-0.70 | 0.040 | 0.050 | ||
| 1078 | 0.72-0.85 | 0.30-0.60 | 0.040 | 0.050 | ||
| 1080 | 0.75-0.88 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1084 | 0.80-0.93 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1085 | 0.80-0.93 | 0.70-1.00 | 0.040 | 0.050 | ||
| 1086 | 0.80-0.93 | 0.30-0.50 | 0.040 | 0.050 | ||
| 1090 | 0.85-0.98 | 0.60-0.90 | 0.040 | 0.050 | ||
| 1095 | 0.90-1.03 | 0.30-0.50 | 0.040 | 0.050 | ||
Resulphurized Carbon Steels |
||||||
| 1108 | 0.08-0.13 | 0.50-0.80 | 0.040 max | 0.08-0.13 | ||
| 1110 | 0.08-0.13 | 0.30-0.60 | 0.040 max | 0.08-0.13 | ||
| 1117 | 0.14-0.20 | 1.00-1.30 | 0.040 max | 0.08-0.13 | ||
| 1118 | 0.14-0.20 | 1.30-1.60 | 0.040 max | 0.08-0.13 | ||
| 1137 | 0.32-0.39 | 1.35-1.65 | 0.040 max | 0.08-0.13 | ||
| 1139 | 0.35-0.43 | 1.35-1.65 | 0.040 max | 0.13-0.20 | ||
| 1140 | 0.37-0.44 | 0.70-1.00 | 0.040 max | 0.08-0.13 | ||
| 1141 | 0.37-0.45 | 1.35-1.65 | 0.040 max | 0.08-0.13 | ||
| 1144 | 0.40-0.48 | 1.35-1.65 | 0.040 max | 0.24-0.33 | ||
| 1146 | 0.42-0.49 | 0.70-1.00 | 0.040 max | 0.08-0.13 | ||
| 1151 | 0.48-0.55 | 0.70-1.00 | 0.040 max | 0.08-0.13 | ||
Rephosphorized-Resulphurized Carbon Steels |
||||||
| 1212 | 0.13 max | 0.70-1.00 | 0.07-0.12 | 0.16-0.23 | ||
| 1213 | 0.13 max | 0.70-1.00 | 0.07-0.12 | 0.24-0.33 | ||
| 1215 | 0.09 max | 0.75-1.05 | 0.04-0.09 | 0.26-0.35 | ||
| 12L14 | 0.15 max | 0.85-1.15 | 0.04-0.09 | 0.26-0.35 | 0.15-0.35 | |
About Us | Site Map | Privacy Policy | Contact Service Center Locations | ©2004 Benjamin Steel Co., Inc.
